High-end winter tyre generation with state-of-the-art technology. ‚Miura- Ori‘ 3D sipe technology, 4D nano design compound and micro-optimised stiffening of the tread blocks combine satisfying winter characteristics with low noise and outstanding performance in wet conditions.
FEATURES & BENEFITS
Designed for directional stability, with patented “Miura-Ori” 3D sipe technology
4D Nano Designed compound
Micro-optimised stiffer tread blocks
Outstanding traction and braking performance in snow and ice
Excellent directional stability on snowy roads
MADE FOR WINTER ROAD CONDITIONS
In order to satisfy the high stresses and demands of the cold season, winter tyres are composed of a variety of high quality materials and design features.
Innovative tread design
Flow-optimised tread grooves
Boosts the ‚water pump effect‘
Effective and safe dispersion of water
First class hydroplaning reserves
Outstanding traction on snow
New Miura-Ori 3D sipe technology
Flow-optimised tread grooves
Flexible sipe structure for short braking distances on snow and ice
Highest possible stiffening of the sipe edges for optimum stability in curves
Signifi cantly improved traction on snow and ice as well a more uniform wear pattern
4D-NANO DESIGN - FALKEN’S INNOVATIVE RESEARCH AND SIMULATION PROGRAM
Pioneering 4D-Nano Design technology enables our engineers to simulate the complex interactions of tyre compound components at the nano-level.
High-end materials research technology
Shorter development times
Simulation of energy loss / heat generation
Development of groundbreaking tyre compounds with signifi cantly reduced rolling resistance
In-depth analysis of changes in tyre compound composition throughout tyre life
Out-of-phase tread bars
Reduced road noise
First class comfort
Runflat tyres have reinforced sidewalls that reduce deformation if the tyre sustains damage or a puncture; they can thus continue to be driven for at least a further 80 km at a maximum speed of 80 km/h. Falken Runflat Tyres combine this ‘limp-home’ mode with top performance in all areas. Incidentally, manufacturers specify that runflat tyres must be used with a tyre pressure monitoring system because the tyres are so effective that drivers may not actually notice their tyre has a puncture.
EU Tyre Label and Efficiency Classes
The European Union, under CE 1222/2009, has mandated that all tyres manufactured after the date of July 1 2012 for cars and commercial vehicles include standard EU Tyre Labels classifying them by three performance characteristics:fuel efficiency classified from A to G,wet grip classified from A to G, and noise emission in decibels.
Categories of tyres unaffected by this regulation include: retreaded tyres, professional off-road tyres, racing/sports car tyres, as well as certain types of tyres designed to improve traction such as studded tyres, T-type temporary spare tyres, tyres for cars built before 1990, tyres with a maximum allowed speed of 80km/h, tyres for rims with a diameter less or equal to 254 mm or greater or equal to 635 mm. This label is intended on one hand to promote economic and ecological efficiency in traffic, as well as increase road safety, and on the other hand to help consumers select appropriate tyres by ensuring a certain degree of product transparency.
Nevertheless, the label has been criticized for only showing a very limited number of characteristics. Professionals argue that tyres have many more features that are important and relevant to road safety, including but not limited to aquaplaning properties, driving stability, service life, product properties on wet and dry roads other than wet grip, properties on snow. Tyre manufacturers suggest that the test results from various institutions and industry magazines should remain a very important source of information for the end consumer, because they focus on and rate a wide variety of tyre properties and features.
EUROWINTER HS01 RUNFLAT
205/55 R16 91H, runflat
With/Without Valve (TT/TL)
Tyre requires tube
Falken Tyre Europe GmbH is the European subsidiary of Japanese tyre manufacturer Sumitomo Rubber Industries Ltd. From its headquarters in Offenbach
am Main, Germany, Falken Tyre Europe oversees the marketing of a complete portfolio of tyres for cars, trucks, vans and SUVs as supplier of OEM products
and for the European aftermarket. The company has built up a sales network of around 8,000 tyre dealers throughout Europe, which act as our partners for
sales and fitting of our quality products.
* The list prices, if available, are a net calculation basis for determining sales prices between tire manufacturers and their dealers. In no case are the selling prices paid or usually paid.
**Prices include VAT and delivery within Ireland.
***More than 90% of our orders reach the customer in the specified delivery time.