Zigzag center rib design increases grip performance on straight way
Four broad circumferential groove design with 35% void ratio enhances drainage efficiency and maneuverability on wet road condition
Broad circumferential groove design (outside groove wall angle>inside groove wall angle) drains water more easily, and even prevents slipping
3-Dimension arc groove design between blocks helps increasing stiffness between blocks, and also disturbs air flow in grooves
Applying “groove in groove” concept on circumferential grooves disperses stress on tire surface, and prevents irregular wear and noise produced by the friction between air flow and groove wall
Separating circumferential grooves and radial grooves decreases rolling noise
Adding sipes and thin grooves on blocks and shoulders balances block stiffness and riding comfort.
EU Tyre Label and Efficiency Classes
The European Union has introduced the EU Tyre Label by Regulation (No. 1222/2009) identically and bindingly for all EU member states. It applies to passenger car tyres, light commercial vehicle tyres and heavy commercial vehicle tyres produced after 01.07.2012.
Three different areas are tested: rolling resistance, wet grip and the rolling noise the tyre makes on the road.
The following are not affected by the EU Tyre Label: retreaded tyres, professional off-road tyres, racing tyres, tyres with additional devices to improve traction such as spiked tyres, T-type emergency tyres, special tyres for fitting to vehicles first registered before 1 October 1990, tyres with a maximum authorised speed of 80 km/h, tyres for rims with a nominal diameter of 254 mm or less or 635 mm or more.
With this regulation, the European Union is pursuing the goal of promoting economic and ecological efficiency in road traffic as well as increasing road safety on the one hand, and on the other hand, granting consumers more product transparency and at the same time serving as an active decision-making aid.
Already during the incorporation, experts criticise the fact that the EU Tyre Label unfortunately only shows a few product characteristics. Apart from rolling resistance, wet grip and rolling noise, which are the main focus of EU tyre labelling, tyres have much more important and safety-relevant product characteristics, such as aquaplaning properties, driving stability, service life, braking properties on dry and wet roads, behaviour in wintry conditions, etc.
Tyre manufacturers point out that test results from various institutions and journals remain an important information medium for the end consumer. These tests usually focus on further safety-relevant product characteristics besides the EU standard qualifications for tyre labelling, which are always important for the final customer.
275/40 ZR20 106W XL with rim protection (MFS)
With/Without Valve (TT/TL)
Tyre requires tube
*Prices include VAT and delivery within Ireland.
**More than 90% of our orders reach the customer in the specified delivery time.